Hi,
Does anyone use an external switch to trigger the "next" button on DVC CUE in standalone mode?µ
In used pin 2 on port 4, mapped the "shortcut" in the prefs : It works fine, when connected to the computer in USB mode.
But... looks like it does not run in stand alone mode.
Any suggestion to fix this issue?
Is there a way to connect directly to the physical "next" button ?
thanks for help
DVC CUE external
-
nicolight61
- Posts: 2
- Joined: Sat May 03, 2025 9:27 am
- Operating System: Mac OS X
Re: DVC CUE external
Hello,
To my knowledge, there is no way to externally trigger the Next button, or at least- not using a direct connection through the dry contact ports.
That being said, you should be able to do this wirelessly through the Arcolis Remote or Arcolis Remote Pro app. You will need to connect your DVC CUE to a router via the RJ45 port, then you can connect a mobile or tablet to the same network, then set up a button which will trigger the 'Next scene' function.
Kind regards,
Will
To my knowledge, there is no way to externally trigger the Next button, or at least- not using a direct connection through the dry contact ports.
That being said, you should be able to do this wirelessly through the Arcolis Remote or Arcolis Remote Pro app. You will need to connect your DVC CUE to a router via the RJ45 port, then you can connect a mobile or tablet to the same network, then set up a button which will trigger the 'Next scene' function.
Kind regards,
Will