Bug Report - Slider Midi In

guerti · Post by **guerti** » Wed Aug 08, 2012 8:34 pm

Hey.

There are some problems with the Slider Midi In.

The first is: If I change the scenes in live mode every slider with Midi In jump up to 255 for one or two frames. The effect is, that the rgb fixtures flash white if I change the scene, because of the color channels and dimmer have Midi Input.

And the second: I can only control the devices if I have selected the respective device tab. And If I change the tab every Midi instructions lost.

Thanks.

Post by **simonB** » Mon Aug 13, 2012 11:35 am

Hi

I have reproduced the second bug, thanks for that.

I cannot reproduce the first bug. Open up the DMX output window, can you see the flicker here?

guerti · Post by **guerti** » Wed Aug 15, 2012 9:40 am

Hi

I can´t see the flicker in the DMX output window but in the real output the devices flicker.

nijst001 · Post by **nijst001** » Thu Aug 16, 2012 10:21 am

i've tested the bug also with my BCF-2000, but i don't have te flicker to. can you test it with DVC 2, maybe the bug is in your midi device

Post by **simonB** » Thu Aug 16, 2012 12:28 pm

I can´t see the flicker in the DMX output window but in the real output the devices flicker.

Then it is probably not a problem with the DVC3 software. It could be the hardware or your fixtures. Try with DVC2.