Daslight Forum

S.lellwitz wrote: ↑Thu Jul 11, 2024 8:28 pm So...

This is not possible directly from Daslight,
because Daslight does not output the saved fader values ​​in a scene via MIDI when the scene is running.

For each scene there is another dimmer for the scene in DL5 (on the right edge of the screen in the scene options)
This can be mapped to midi and will also output midi if changed in the software, but this cannot be automated. to thread it in, for example like in your video, at the push of a button.

I can't think of a workaround for this

This could be achieved using the BOME midi translator.
However, requires a little additional programming.
So the push of a button would not be sent to daslight at all, but would only initiate the fade within the BMT, which then goes to the fader, which then sends it to daslight.

I hope that was all understandable.
Roughly speaking, I would say that almost anything can be achieved with the X-Touch and the Bome MIDI translator in conjunction.


I hope I could help you.
I'll try to make some more video tomorrow.

Maybe send me a number or email via PM, then I would send you a video of the event tomorrow via email, WhatsApp or something similar.

best regards