Hello, I have a problem with a Cameo DVC d5 interface that only plays one scene correctly in stand alone mode. I have 10 RGB elements patched and created several static color scenes and some with different steps of different colors. When I pass them to the interface memory only the first scene is played with the same color in all the luminaires but in the rest of the scenes the color is not played correctly... for example, scene 2 has all the luminaires in green and when it is executed in stand alone mode some turn green and others in other colors. If I execute the scenes from the software outside of stand alone using Daslight 5 (Express mode) everything plays correctly. The version I am using of Daslight is 5.0.4.2 in express mode and curiously this also happens to me with a Cameo DVC interface that I also have.
It seems strange to me that both interfaces are wrong.
¿ Any suggestions?
Problem whit Cameo DVC D5 in stand alone mode
Re: Problem whit Cameo DVC D5 in stand alone mode
Hello,
Thanks for reporting this! Would you please be able to attach a .zip file containing your .dvc project to this thread so that I can test this and try to replicate the behaviour?
Kind regards,
Will
Thanks for reporting this! Would you please be able to attach a .zip file containing your .dvc project to this thread so that I can test this and try to replicate the behaviour?
Kind regards,
Will
Re: Problem whit Cameo DVC D5 in stand alone mode
Hello, I am attaching the file you are demanding from me.
Re: Problem whit Cameo DVC D5 in stand alone mode
Hello,
Thanks for sharing that! I am not able to reproduce any of this behaviour on my side at all- perhaps it would be helpful to see a video demonstrating the whole process (from writing the show, to testing it). You can either send this via wetransfer.com to my email address ([email protected]), or perhaps send a Google Drive link here if preferable.
When using the controller in Live mode (i.e. connected to the fixtures directly when connected to the software), does everything work as expected? If they all work as expected in Live mode, there should be no difference between this and the Stand Alone playback- but I notice that the RGB fixtures are patched with a 1 channel gap on each (and a 2 channel gap between rgb 2 and 3), so I wondered if there was some patching issues perhaps.
Kind regards,
Will
Thanks for sharing that! I am not able to reproduce any of this behaviour on my side at all- perhaps it would be helpful to see a video demonstrating the whole process (from writing the show, to testing it). You can either send this via wetransfer.com to my email address ([email protected]), or perhaps send a Google Drive link here if preferable.
When using the controller in Live mode (i.e. connected to the fixtures directly when connected to the software), does everything work as expected? If they all work as expected in Live mode, there should be no difference between this and the Stand Alone playback- but I notice that the RGB fixtures are patched with a 1 channel gap on each (and a 2 channel gap between rgb 2 and 3), so I wondered if there was some patching issues perhaps.
Kind regards,
Will
Re: Problem whit Cameo DVC D5 in stand alone mode
Hello again. As I mentioned in my post before, connecting in live mode from my laptop and the interface all the scenes are played correctly in the luminaires, but in the stand alone mode this problem happens with the same paging. In this installation there was a MyDMX 3.0 interface and it worked correctly. Unfortunately the interface broke down and I installed the DVC D5 with its corresponding software and now I have this problem.