hi, i work with DVC 1 since 2004 , and now i buy DVC2. now i have problems with my first scene. the bug is that i creat a STEP with chanel with a FADE (5 seconds) beguinning in DMX number 0 to 255 for example, and when i click in "play"(ore in LIVE) , it dont work, i can t se the movement in 3D visualization and the Robot dont move , when i click in STOP, and click in Step, the chanels numbers are ok and i can se the movement on de 3D visualization and on my robot!
it hapens in group, i have LEDs and movingheads and one ore to chanels have this problem.
i buy DVC2 to try to get away from the bugs and crashes..now this.,..
Andre wrote:IS FADE ticked in the setup page for the fixtures ?
yes... i give an exemple.... in other example, i create a dimming FX for 10x LED painels, and when i create the automatic "steps", the steps are allright, the channels of fictures are ok...visualizating step by step, but when i click in "play", one of the LEDs dont respond...the channels dont dove, i cant see the numbers moving....comparing with the other LEDs... and in the 3D, it dont show anithing in this LED, it t respond ..and in real, it dont get any signal...
its a bug software... now it is craching sometimes when im testing the "play"
Andre wrote:What version of the software are you running ? Date from the splash screen when it starts.
It all works for me OK and many others, so I am pretty sure it's something simple.
Have you been patching/unpatching fixtures, deleting and re-creating scenes as it might be the database has got corrupted.
What settings do you have turned on in the "Options" menu ?
I have sent you a PM about emailing me your show.
What is the specification of your computer ?
its my first scene...on DVC2
i have DUO T7300, 2GB RAM, GForce 8400 128mb
That's good enough to run Daslight and the Visualiser.
Those LED Par 56s do not work properly in the visualiser. I have them and the LED pars work fine in real life but the colours are wrong in the visualiser. Can't get blue at all in the visualiser.
I am using the BETA version of the software and use it live and no problems running my show. I have nearly 500 scenes in over 30 Groups.
Last edited by Andre on Mon Jun 29, 2009 10:38 pm, edited 1 time in total.
You must have a problem with your install or something on your computer that is causing these problems. Do a re-install. Start a new show. Change the options as mention in PMs. Don't give up with it, yes it is frustrating.
As said in PM to you I cannot comment on the DVC1 load/import as have not used it. I will try tomorrow after work, with the file you supplied.
Yes there is a problem with the (Stairville/Showtec) Par 56 LED fixture file in the Visualiser, but they do work properly on real lights, I use that fixture file and real fixtures and have no problems with the real lights, only in the visualiser. It has been reported to Daslight, but have had no response. I even created the fixture myself and still the same problem in the visualiser.
