Bugs and requests.
Posted: Wed Dec 14, 2011 1:28 pm
OK in set up page .
channel sliders have to be set to auto (green) or you do not have any control.
in group window (with heads selected) even with channel sliders set to auto, there is no control
when presets are slected (ie colours or gobos) chanels turn to auto, but still no actual dmx output.
In Editor page.
request for default fade time set to 1 sec. and select all should be default.
I used Acme queenspot 6ch, master fade and scene fade in love did not work, util a lot of tweaking with the fixture set the ch1 to dimmer master.
so presumably many of the heads need editing for master dimmer chanels?
plus after editing head in scan lib. repatching to the patch this corrupts any stored scene channel data info badly.
Live mode.
pinning and unpinning causes double rows of general tab plus head tabs!!
reset live actions does not restore chanels to previous state ie turned off , but seems to leave ch slider in LTP mode. reset live actions only seems to work when ch sliders are put into auto (green) mode.
right clicking scene buttons , then colour option comes up with colour 1-10. not always the colour boxes.
right click scene, properties, not possible to select with next or previous, this still does not work if you use the top ribbon next prev. but if you use the group icon next prev, this corrupts the program and crashes the program. even if you remove the tick box in thescene next prev.
Shortcut for next live can only be used with control button plus another button, this is not much use as a "GO" button. please give us a single button option. ie spacebar for this.??
all for now. Will keep testing, oh and a suggestion, can you make the colour bar a bit bigger so it stands out a bit more. and the step select all button is not clear and in the wrong place.
channel sliders have to be set to auto (green) or you do not have any control.
in group window (with heads selected) even with channel sliders set to auto, there is no control
when presets are slected (ie colours or gobos) chanels turn to auto, but still no actual dmx output.
In Editor page.
request for default fade time set to 1 sec. and select all should be default.
I used Acme queenspot 6ch, master fade and scene fade in love did not work, util a lot of tweaking with the fixture set the ch1 to dimmer master.
so presumably many of the heads need editing for master dimmer chanels?
plus after editing head in scan lib. repatching to the patch this corrupts any stored scene channel data info badly.
Live mode.
pinning and unpinning causes double rows of general tab plus head tabs!!
reset live actions does not restore chanels to previous state ie turned off , but seems to leave ch slider in LTP mode. reset live actions only seems to work when ch sliders are put into auto (green) mode.
right clicking scene buttons , then colour option comes up with colour 1-10. not always the colour boxes.
right click scene, properties, not possible to select with next or previous, this still does not work if you use the top ribbon next prev. but if you use the group icon next prev, this corrupts the program and crashes the program. even if you remove the tick box in thescene next prev.
Shortcut for next live can only be used with control button plus another button, this is not much use as a "GO" button. please give us a single button option. ie spacebar for this.??
all for now. Will keep testing, oh and a suggestion, can you make the colour bar a bit bigger so it stands out a bit more. and the step select all button is not clear and in the wrong place.