Daslight Forum

Bonjour
auriez vous une astuce pour que dans une scène, les lyres soient éteintes pendant le mouvement et s'arrêtent 2s par exemple en étant allumées, puis repartent dans un mouvement éteintes..

Hello,

Thanks for raising this thread! This is somewhat of a tricky issue to tackle, since Daslight 5 actually has no knowledge of whether the fixture is moving or not. Daslight can send an instant change from 0-255 on the Pan/Tilt channels, however there is no feedback from the fixture as to when the movement is completed.

Some fixtures include a 'blackout whilst moving' or 'blackout whilst colour wheel changing' in built preset, however many dont have this.

I believe the best way for you to set this up is to use a Steps scene type. That way, you can set specific steps which will blackout the fixture, and then you can turn them back on after a designated length of time. It is also worth noting that you can convert any FX scene to a Steps scene if you have something already programmed.

See the example video below:

https://drive.google.com/file/d/1s3tCKD ... sp=sharing

Kind regards,
Will