Daslight Forum

Hello,

I am new to DMX and Daslight 5 and i have been expirimenting for a while now. I have made a bank with colors, a bank with color FX and a bank with differeny moving FX for my movingheads.

When i chose a color or a coloe FX it works, but when i then chose a movement for the movingheads, all colors go to white. At this time the color scene is still active, but not showing.

I have checked and at the movinghead scenes the dimmers are 100%.

Is there anything i am missing or could someone guide me to a solution? Thanks!

Hello,

It is most likely that when programming your moving head Move FX you turned the beam on in order to visualise the actual beam, but inadvertently this also stores the colour channels as white within the Move FX scenes. In order to remove this you would need to select each Move FX scene, then go to the Colour tab and press the green dot in order to deactivate the Colour channels for the fixture (you may also want to do the same for any other channel that is not the Movement channels, to avoid any other conflicts). That way, your Move FX scenes should only be affecting the movement channels (Pan/Tilt) and nothing else.

Kind regards,
Will