DVC GOLD HE10 Pinout and description accuracy
Posted: Tue Jul 23, 2024 1:52 pm
Good day!
Here at The Fort, we have 2 DVC Gold units. I need to connect an emergency full-on lighting through the HE10 connector, linked to our security / evac system.
Available docs at the moment indicates 2 as GND, and 9, 8, 7, 6 as Ports 1, 2, 3, 4
https://www.daslight.com/manuals/#/en/h ... acts-input
Also, the present docs only represent 8 ports, like here :
https://www.daslight.com/manuals/#/en/d ... tact-ports
Which refers to Farnell 10-pins connectors:
https://uk.farnell.com/avx-interconnect ... /dp/636034
The DVC Gold has a 20-pins connector, known to me as HE10xx20 like this :
https://www.gotronic.fr/art-connecteur- ... 0-5840.htm
But the pinout seems to be quite different:
In looking to close a dry contact, I was going nowhere between pins 2 and 9, 2 and 8 etc. Myself being of sufficient "mass", hitting Pin 1, 2, 3 etc with a non-insulated object did launch 1, 2, 3 ; digging further I found Pins 19 and 20 to be both grounded, and that jumping 20 and 1 launches 1, 20 and 2 gets 2 etc etc, 19 works the same. And we have 16 ports!
Am I crazy ? Is there a doc somewhere about this that I didn't find ? I really appreciate the logic of Pin 1 being Port 1 and so on btw, it is great.
Am I missing something ?
Thanks in advance.
Here at The Fort, we have 2 DVC Gold units. I need to connect an emergency full-on lighting through the HE10 connector, linked to our security / evac system.
Available docs at the moment indicates 2 as GND, and 9, 8, 7, 6 as Ports 1, 2, 3, 4
https://www.daslight.com/manuals/#/en/h ... acts-input
Also, the present docs only represent 8 ports, like here :
https://www.daslight.com/manuals/#/en/d ... tact-ports
Which refers to Farnell 10-pins connectors:
https://uk.farnell.com/avx-interconnect ... /dp/636034
The DVC Gold has a 20-pins connector, known to me as HE10xx20 like this :
https://www.gotronic.fr/art-connecteur- ... 0-5840.htm
But the pinout seems to be quite different:
In looking to close a dry contact, I was going nowhere between pins 2 and 9, 2 and 8 etc. Myself being of sufficient "mass", hitting Pin 1, 2, 3 etc with a non-insulated object did launch 1, 2, 3 ; digging further I found Pins 19 and 20 to be both grounded, and that jumping 20 and 1 launches 1, 20 and 2 gets 2 etc etc, 19 works the same. And we have 16 ports!
Am I crazy ? Is there a doc somewhere about this that I didn't find ? I really appreciate the logic of Pin 1 being Port 1 and so on btw, it is great.
Am I missing something ?
Thanks in advance.