Daslight Forum

I try to use Etec LED Mini Eye 7 in daslight 5 but I found some big issues with the fader.


Issue 1: Fader for Beam 7 allways change the values of Beam 7 and the main fader (All Beams) as well. I double checked the profile, created a complete new profile but the topic is allways the same. It sames like it ins't possible to user more then 6 Beams in 1 fixuere.

Issue 1: The Fader Beam 1-6 for white have no function. It seams like it it is only possible to have RGB Beams and not RGBW.

In the groupe view everything looks like expected but the system don't change the DMX-Output.

SSL file: Etec LED Mini Eye 7 (49CH)

das will not mix the white channel in the color table, white must be triggered manually ( this is important for uniform color temperature and manual control over full true white)

however this issue you are having I believe is an actual issue with the fixture ssl file,

Hello,
The problem is that there is a global RGB control for all beams, and an individual control.

The best thing to do with this kind of fixture is to modify the ssl and change type of the global RGB to undef type channel.

Regards

Thank you for the idea with the undef type channels.

I changed all white channels and channel 7 it works now.

But from my point of view Daslight has a problem with movingheads in combination with more then 6 Beams. With 6 Beams (white is a different problem) everything worked like it should. But if you add more then 6 beams 7....10 ... all beams with higher numbers will control the general color fader as well. The beams 1-6 dosn't move the general color fader.

In general white color at beams is a bug as well.

In groupe window everything looks like aspected but the dmx values are faulty.