Live mode current fader levels

The new Daslight - for PC and Mac

Moderators: TomHat, simonB

hutje
Posts: 35
Joined: Tue Aug 22, 2017 5:45 pm
Operating System: Windows

Live mode current fader levels

Post by hutje »

When live adjusting a fixture, it is not visible what the current value is when live adjusting a scene.
If you want to correct a fixture (movinghead) to adjust the position, when I enable live, it sets the position to P:50% T:50%.
Please make it possible before enabling the live-mode, you can already see what value the faders are and when enabling, it keeps its value and you can adjust it accordingly.
It is also necessary to be able to get live midi and OSC feedback. When I use midi with motorized faders or OSC, the values need to be always synced.

Now we are working blind.
Scene in editing mode.png
Scene in editing mode.png (242.45 KiB) Viewed 66814 times
Scene active no visual feedback in live.png
Scene active no visual feedback in live.png (235.31 KiB) Viewed 66814 times
Scene active visual feedback but always starts at P50 T50.png
Scene active visual feedback but always starts at P50 T50.png (240.36 KiB) Viewed 66814 times
hutje
Posts: 35
Joined: Tue Aug 22, 2017 5:45 pm
Operating System: Windows

Re: Live mode current fader levels

Post by hutje »

I still hope this will be implemented in a future update.
willm
Posts: 605
Joined: Wed Jun 08, 2022 3:19 pm

Re: Live mode current fader levels

Post by willm »

Hello,

Thanks for bringing this again to our attention, I will make a note of this for the developers to look into as I believe it is a good idea to have. I can make no guarantees as to if/when this would be implemented, or if it is actually possible with Daslight 5's current setup- but it will be checked and evaluated nonetheless.

Kind regards,
Will
Post Reply