Daslight Forum

Hi,

When setting OSC output to an IP address, the address does not save and reverts back to the local IP of the machine that DL is running on.

If the OSC output address is not saved and reverted to the local IP of the machine running the program, there could be several reasons such as:badland

Configuration issue: Double check the configuration settings to make sure you are setting the OSC output address correctly.

Permissions issue: If you are running the program with limited permissions or in a restricted environment, Try running the program as administrator or as root to see if it allows you to save the OSC output address. Are not.

Firewall or network settings: Check your firewall and network settings to make sure they're not blocking or interfering with communications.

@MarcFay I appreciate you are trying to be helpful, but the application not saving a setting is indicative of a bug in the application, not any of the red herrings you have supplied.

Small offtopic, what for or how do you use OSC? Is it easy to control the Daslight over the network? What do you need that for?

I'm mainly using it to send commands to a Behringer X32 e.g. mute effects on blackout, but it can also be used to receive OSC from a tablet running TouchOSC or another application such as QLab.

Hello,

Yes it will be corrected.
Regards