Stand alone mode not working

jnunez · Post by **jnunez** » Sun Jan 30, 2011 9:14 pm

Hi all,

I am developing a solution for control RGB led strips in a public park. A combination of RGB colors (scene) should be set once a month (twelve scenes in one year) and I would like to use the stand-alone feature of DVC2 GOLD (Firmware version 1.07) for it.

I begin my first test with only two scenes. In Stand Alone Programming panel I have following configuration for the first scene (RED):

Date & Time: Enable
Appointed time: selected
From: 22:05
Everyday: selected

Second scene is similar to the first one but changing the start time and using other color (BLUE).

With this configuration I can't bring the unit to work and start the first scene.
I can change between scenes using + and - buttons on the DVC2.

Of course clocks are correctly synchronized.

Please, can you help me to solve this issue?

Thanks in advance,
José

Post by **simonB** » Mon Jan 31, 2011 9:58 am

Hi José

Thats strange. I have tested here with a DVC2 GOLD and it is working fine. E-mail me your show and I will test it.

jnunez · Post by **jnunez** » Mon Jan 31, 2011 11:14 am

Hi Simon,

I have sent you my little show in a private email.

Thanks!