DVC2 BUG problem with DMX
Posted: Tue Jun 29, 2010 8:52 pm
hi
i dont undestand whats hapning.
the channels are fine, but in the 3D simulation, the movinghead jump/switch the 0 to 255 PAN movement ...and the robot do the same in the real!
but i dont have any PAN channel movement programation.....
=(
i see this in some scenes!!!
i dont undestand whats hapning.
the channels are fine, but in the 3D simulation, the movinghead jump/switch the 0 to 255 PAN movement ...and the robot do the same in the real!
but i dont have any PAN channel movement programation.....
=(
i see this in some scenes!!!