Bug report: Failure storing and loading effekt generator settings
Posted: Fri Aug 10, 2018 9:20 am
Hey,
we are using Daslight 4 to control our Moving-Heads. They are controlled with 18 DMX channels.
We now have configured some effects with two or more functions. For example we use an curve effect for shutter and another curve effect for tilt. No other channel is controlled by the effect generator.
When storing and loading the settings again the channel selection of the curve effects is wrong. Both now select the correct channel (shutter / tilt) selected bevore but now also all channels above 15 (i.e. channel 16, 17 and 18) are selected.
Seems that storing/loading the channel selection for effect generator is not working properly.
We have tried the new version of august already - but experienced the same problem.
Operating system is Windows 10.
we are using Daslight 4 to control our Moving-Heads. They are controlled with 18 DMX channels.
We now have configured some effects with two or more functions. For example we use an curve effect for shutter and another curve effect for tilt. No other channel is controlled by the effect generator.
When storing and loading the settings again the channel selection of the curve effects is wrong. Both now select the correct channel (shutter / tilt) selected bevore but now also all channels above 15 (i.e. channel 16, 17 and 18) are selected.
Seems that storing/loading the channel selection for effect generator is not working properly.
We have tried the new version of august already - but experienced the same problem.
Operating system is Windows 10.