Daslight Forum

Hallo,
folgendes Problem,
ich habe zwei verschiedene Gruppen mit einigen Szenen erstellt.
alle Szenen sind auch als Gruppe freigegeben.
Wenn ich nun in der ersten Gruppe in Szene starte und danach in der zweiten Gruppe ebenfalls eine Szene starte,
dann geht der Dimmer Fader der Szene aus der ersten Gruppe auf 0 zurück.
Solbald ich die Szene aus der Zweiten Gruppe stoppe, dann geht der Dimmer aus der ersten Gruppe wieder normal auf seinen Wert.
Ich hoffe das ich es ich es verstänlich beschrieben habe.

Google Translation:
Hello,
following problem,
I have created two different groups with some scenes.
All scenes are also released as a group.
If I start in the first group in scene and then start in the second group also a scene,
Then the dimmer fader of the scene from the first group returns to 0.
As soon as I stop the scene from the second group, the dimmer from the first group returns to its normal value.
What could that be?

I hope I've described it understandably.

Gruß Willi

Hi Gruß Willi,

Most likely, the scene in group 2 contains modes "On" and values "0" for faders that are used in group 1.

To have the group 1 lit while the group 2 is run, the channels for fixtures used in group 1 must be set to mode "Off" in all steps of the scene in group 2.

A channel "Off" means "leave the channel as it is, whatever its current value", however a channel "On" with value "0" means "send a zero value to that channel".

Hope this helps.

Thanks for the quick reply.
I do not understand so correctly but I want to check it and try
Greeting Willi

Hi PolDavril,
Again thank you for your reference.
Problem solved