Daslight Forum

hi,
i work with DVC 1 since 2004 , and now i buy DVC2.
now i have problems with my first scene.
the bug is that i creat a STEP with chanel with a FADE (5 seconds) beguinning in DMX number 0 to 255 for example, and when i click in "play"(ore in LIVE) , it dont work, i can t se the movement in 3D visualization and the Robot dont move , when i click in STOP, and click in Step, the chanels numbers are ok and i can se the movement on de 3D visualization and on my robot!

it hapens in group, i have LEDs and movingheads and one ore to chanels have this problem.

i buy DVC2 to try to get away from the bugs and crashes..now this.,..

Is "FADE" ticked in the setup page for the fixtures ? because if not it will just snap to the values.

Andre wrote:IS FADE ticked in the setup page for the fixtures ?

yes...
i give an exemple....
in other example, i create a dimming FX for 10x LED painels, and when i create the automatic "steps", the steps are allright, the channels of fictures are ok...visualizating step by step, but when i click in "play", one of the LEDs dont respond...the channels dont dove, i cant see the numbers moving....comparing with the other LEDs...
and in the 3D, it dont show anithing in this LED, it t respond ..and in real, it dont get any signal...

its a bug software... now it is craching sometimes when im testing the "play"

What version of the software are you running ? Date from the splash screen when it starts.

It all works for me OK and many others, so I am pretty sure it's something simple.

Have you been patching/unpatching fixtures, deleting and re-creating scenes as it might be the database has got corrupted.

What settings do you have turned on in the "Options" menu ?

I have sent you a PM about emailing me your show.

What is the specification of your computer ?

Andre wrote:What version of the software are you running ? Date from the splash screen when it starts.

It all works for me OK and many others, so I am pretty sure it's something simple.

Have you been patching/unpatching fixtures, deleting and re-creating scenes as it might be the database has got corrupted.

What settings do you have turned on in the "Options" menu ?

I have sent you a PM about emailing me your show.

What is the specification of your computer ?

its my first scene...on DVC2

i have DUO T7300, 2GB RAM, GForce 8400 128mb

k__x wrote:

Andre wrote:What version of the software are you running ? Date from the splash screen when it starts.

It all works for me OK and many others, so I am pretty sure it's something simple.

Have you been patching/unpatching fixtures, deleting and re-creating scenes as it might be the database has got corrupted.

What settings do you have turned on in the "Options" menu ?

I have sent you a PM about emailing me your show.

What is the specification of your computer ?

its my first scene...on DVC2

i have DUO T7300, 2GB RAM, GForce 8400 128mb

That's good enough to run Daslight and the Visualiser.

Those LED Par 56s do not work properly in the visualiser. I have them and the LED pars work fine in real life but the colours are wrong in the visualiser. Can't get blue at all in the visualiser.

I am using the BETA version of the software and use it live and no problems running my show. I have nearly 500 scenes in over 30 Groups.

this is not my problem...in led ficture..

my problem is the bad working of the software..the fiability...

it happens in LED, in movinghead....etc...it crashes.....
it dont open the DVC1 show....etc...

The software works......

You must have a problem with your install or something on your computer that is causing these problems.
Do a re-install. Start a new show. Change the options as mention in PMs.
Don't give up with it, yes it is frustrating.

As said in PM to you I cannot comment on the DVC1 load/import as have not used it. I will try tomorrow after work, with the file you supplied.

Yes there is a problem with the (Stairville/Showtec) Par 56 LED fixture file in the Visualiser, but they do work properly on real lights, I use that fixture file and real fixtures and have no problems with the real lights, only in the visualiser. It has been reported to Daslight, but have had no response. I even created the fixture myself and still the same problem in the visualiser.