Tap Tempo
Posted: Sat Sep 03, 2016 4:48 am
Hello everyone.
Is there a way to tap in a tempo manually in DVC1 ?
Many thanks.
Is there a way to tap in a tempo manually in DVC1 ?
Many thanks.
Manual sound to light, manual audio BPM sync.
You can also trigger off your steps and scenes manually:
• In the Audio analysis tool, select Manual mode and choose BPM
speed (Min: 20 BPM; Max: 400 BPM).
• In Audio Analysis, select Learning mode. Click on the button seven
times to save BPM speed as a reference. Time between each step must
be the same.
• Close the Audio analysis tool and set your scene in BPM or BPM with
fade mode. Press TAB key to manually go on to the next step.