Daslight Forum

Hi,
we have the 'DMX interface DVC3 Gold ZM (last updated firmware)
I have problems with the 'DMX input:
I connected a console dmx (Sunny 512) but I have to dvc3 input signals in Daslight 3 (I also tried the beta of 21 April)
In hardware manager I see the signal and sliders move but no software.
I read that other users have had the same problem.
is there a solution?

Thanks

Hi there,

Couple of things for you to check to try and get things working.

Make sure 'DMX input' is selected under the 'Input' menu bar in DVC3.

Also check that you the correct DMX input universe is set in the "interface Manager' which you can get to from the 'Tools' menu bar.

Below is a link to the relevant section of the manual which may help.
http://manuals.daslight.com/en/540-615- ... Sb9Sg1.htm

If you try both of these and are still having problems let me know exactly what you are wanting to control with the DMX input and I can try and help further.