Daslight Forum

Hello,

I have a request for a new feature / change in Daslight.

I would like to control some channels permanently via DMX-In. I can assign a channel from my DMX-In to a single or multiple channels in Daslight. Thats very good.
But if I click one of the three "Reset" buttons, also the setting for DMX-In on that channel gets lost. For some people this may be very helpful, but I would like to keep the DMX-In setting for the channel and reset only LTP and HTP.
In my opinion it would be a nice feature to have a general setting for the channel reset mode: "Reset all channel modes to Auto / Off" and "Reset only HTP and LTP to Auto / Off".

I think this is the same with MIDI.

Kind regards,
the-hubmaster

This will be corrected in the next beta release.

I am a little bit angry...

You have changed this feature back, so the DMX IN configuration for a channel is lost, when i "reset all live actions"! Too bad, I had to realise this during a show!

Please correct this, or let the user choose whether the DMX-In should be reseted or not.

I need this as soon as possible!

the-hubmaster

Hi, are you referring to the beta or the official version? (the beta has just been officialised today)

I'm referring to the latest beta (10th Feburary 2015)...

So I had to use another software Version from about one year ago, which had other bugs...

This problem is corrected in the official release from February 16th.