Bug with DMX on a channel in live and editing
Posted: Fri Sep 06, 2013 9:49 pm
Hi,
you can not turn of a channel in editor when you assign DMX in live:
- patch 6dimmers
- go to live and set a DMX input for channel 1 (must be yellow in the bottom of the fader)
- go to editor and create group and a scene and a step and choose channel 2 for the step. you will the channel 1 is set "on" and you can not turn it off because of the DMX
- go to live, turn of DMX on channel 1
- go to editor, change your scene and you will be able to turn off channel 1
If during edit channels are set to "on" in scenes, you were not be able to use your DMXin during usage of these scenes in live.
Workaround: every time you want to edit a scene, all DMX-controls in live have to be disabled.
Regards
Thomas
you can not turn of a channel in editor when you assign DMX in live:
- patch 6dimmers
- go to live and set a DMX input for channel 1 (must be yellow in the bottom of the fader)
- go to editor and create group and a scene and a step and choose channel 2 for the step. you will the channel 1 is set "on" and you can not turn it off because of the DMX
- go to live, turn of DMX on channel 1
- go to editor, change your scene and you will be able to turn off channel 1
If during edit channels are set to "on" in scenes, you were not be able to use your DMXin during usage of these scenes in live.
Workaround: every time you want to edit a scene, all DMX-controls in live have to be disabled.
Regards
Thomas