Daslight Forum

Posted: **Sun Nov 04, 2012 11:27 am**

Hello,

I am using DVC2 04th Oct 2012 on Win 7 Home Premium 64bit.

In the view that shows all the faders and on the right all the fixtures of a fixture group I tried to set a LTP value by moving the fader. The DMX-Value is set and sent to the fixtures but the fader displays 0 and got back to the bottom. In all other views it works fine. Also the faders that are in AUTO mode are displayed correct in this view.

Should I send you my showfile?

the-hubmaster

P.S.: It seems to be the same at HTP.

Posted: **Wed Nov 14, 2012 11:45 am**

I can't reproduce this. Make sure you have a fixture selected. If you still have the prob, make a short screen recording or send over a small show

Posted: **Wed Nov 14, 2012 8:31 pm**

perhaps in the tools menu, show the moving fader is the problem here?

Posted: **Thu Nov 15, 2012 9:14 pm**

No it is configured correctly.

Video of the problem: http://www.file-upload.net/download-6812844/2012_11_14_16_32_44_1600x900.avi.html

Posted: **Tue Nov 20, 2012 2:24 pm**

I'm not sure what's going on here. I've forwarded it onto the developers who are making some tests

Daslight Forum

Bug: Faders do not stay at DMX value

Bug: Faders do not stay at DMX value