Page 1 of 1

3D Simulator does not connect to Daslight

Posted: Wed Oct 17, 2012 8:02 pm
by the-hubmaster
I am using Daslight VC 2 04 th of October(the programm says 01 Oct 12???)

I create a new project in Daslight and start the 3D Simulator. Than I patch my fixtures in Daslight and klick OK. Normally the 3D Simulator should patch the same fixtures but it does nothing. Also when I move a fader in Daslight the 3D Simulator does not notice this. The 3D Simulator seems not to be connected with the Daslight software.

Posted: Sat Oct 27, 2012 6:59 pm
by davy gabriels
Same problem here...daslight beta version 23 oct doesn't connect with 3D visualizer

Posted: Sun Oct 28, 2012 10:57 am
by Richard CSL
I have the same problem, but interestingly if you open the DMX output panel the values are shown on the grid, so there must be a conection at some level.

Posted: Mon Oct 29, 2012 11:25 am
by nijst001
Here also same problem

Posted: Wed Oct 31, 2012 11:44 am
by simonB
Thanks for this report. The problem has been fixed and you can download a fixed version here:
http://www.daslight.com/downloads/simon ... ulator.exe

Posted: Mon Nov 05, 2012 7:03 pm
by davy gabriels
simonB wrote:Thanks for this report. The problem has been fixed and you can download a fixed version here:
http://www.daslight.com/downloads/simon ... ulator.exe


Install doesn't work here: missing DIIOem.DLL, I tried on several pc's...

Posted: Tue Nov 06, 2012 6:14 pm
by the-hubmaster
davy gabriels wrote:
simonB wrote:Thanks for this report. The problem has been fixed and you can download a fixed version here:
http://www.daslight.com/downloads/simon ... ulator.exe


Install doesn't work here: missing DIIOem.DLL, I tried on several pc's...


It is no installation file. It is the 3D simulator .exe. You have to replace the old one with the new one in the installation folder.

Posted: Tue Jan 08, 2013 7:43 am
by johny3329
Es geht um das Weisse Interface DMX512.
DVC1 ist bisher auf einen XP rechner gelaufen.
Der ist jetzt gegen einen Win7 32Bit mit Touch Monitor getasucht worden

Find keine Treiber für das Interface für Win 7 32Bit???

Where to find Virtual3DSimulator.exe?

Posted: Wed Mar 13, 2013 4:07 pm
by soundedge
Hello,

if I try the link it directs me to the Homepage of Daslight in a new window. But there is no .exe..am I blind or is it hidden? Today I installed the new Software and it doesn`t work either.

simonB wrote:
Thanks for this report. The problem has been fixed and you can download a fixed version here:
http://www.daslight.com/downloads/simon ... ulator.exe


Greetings from Germany

Joachim

Posted: Fri Mar 15, 2013 3:43 pm
by simonB
This is an old link which is no longer available. Download the latest Daslight version to get the latest simulator

Still troubles

Posted: Wed Jun 18, 2014 9:25 am
by joost88
simonB wrote:This is an old link which is no longer available. Download the latest Daslight version to get the latest simulator


The new version has troubles seeing interface so i cant control my lights even tough the interface is connected and seen by daslight. i allready did update firmware.