LTP / HTP
Posted: Fri Apr 20, 2012 8:42 pm
I have programmed a chaser for 8 PAR64 on Channels 1 to 8.
Then I programmed a second scene with the channels 4 and 5 full on.
If I start both szenes in live at the same time, the button LTP and HTP has no function. It works every time in LTP-Mode.
Also the Dimmer-Fader works incorrect, if I set the dimmer of the chaser to 50%, also the faders of channel 4 and 5 will be set to 50%, while the fader of this scene is set to 100% (looks like LTP-Mode).
I use DVC3 Version: 16. March.
Then I programmed a second scene with the channels 4 and 5 full on.
If I start both szenes in live at the same time, the button LTP and HTP has no function. It works every time in LTP-Mode.
Also the Dimmer-Fader works incorrect, if I set the dimmer of the chaser to 50%, also the faders of channel 4 and 5 will be set to 50%, while the fader of this scene is set to 100% (looks like LTP-Mode).
I use DVC3 Version: 16. March.