Daslight Forum

I can't play my scenes or effects because all faders are off. If i manually make them auto they all come to off again when i choose another scene or effect.
Is it me or the 26th Jan version is buggier than the previous?
Thanks

Strange, i can only work in realtime in config mode. Both edit and live make channels off and i can't control them nor the scene or effect previously programed.

I have the same Problem in editor mode ich can move Faders with midi etc and in Live Mode i can´t use the Faders anymore and the Midi feature too

So the channels are set to ON in the editor mode but set to OFF when you trigger the scene in LIVE mode?

That's correct, only if you select the fixture they come auto. Also the first channel dont't work, it shows red in the dmx value rectangle (also in DVC2).
I'am using windows 7 pro 64 Bit and tryed in several computers all with same behaviour.

Do you have this problem in all of your shows?
If yes, e-mail me a small example
If no, send me your problem show and I'll take a look

There is no need to send you a show. All i do is make a new show, select 2 GLP Junior Scan 2 Fixtures.
When i move to the editor tab and select the two scanners faders don't move or the open shutter shortcut.
As i said this did not happened in the early january version.
If you want i can give you access via remote desktop to my computer and see for your self.
Cheers

When you move to the editor tab, you must:
-create a scene
-select the fixtures you want to control
-turn the appropriate channels on

After this, you will be able to move the faders.

I don't think I understand the problem you're having, first you said it is a problem on the live tab..now the editor tab...

Maybe we can arrange a remote desktop connection (we use team viewer), or alternatively you could make a quick screen recording.

Hello
I have the same problem, I check the dimmer dvc2 LIVE with the assigned channel via MIDI, DVC3 changing scene I deactivated the FADER in MIDI mode you could try simply, SIMON with the BCF 2000 and you'll see the flaw, too, remains uncomfortable that changing a scene you are disabling manual changes.


Thank you very much.



MARCO S.

I understand the problem,
all the fixtures that I have in my show, have a dimmer channel, so you can check it by activating the dimmer fader link, up to here everything is ok.

Head mobile PROEL PLML 250SCN in scanlibrary, on channel No. 4 has as function the dimmer up to 140, after this level starts the strobe up to level 240, full open back up to level 255.

With this type of fixture we have difficulty using the dimmer function fade, this is a real problem for many others.




We can do something about it?

Hi Simon,
using Scanlibrary I changed the Channel 4 deleting SHUTTER and DIMMER, doing so using the Fader on the LIVE screen Dimmer works properly.

I have to test her with moving heads, I'll let you know.

Regards ! ! !

Sorry I have no idea what you're talking about.

Please use bullet points like this:
1-patch a PROEL PLML 250SCN
2-make a scene with channel 4 set to 100%
3-go to live
etc.etc.etc......