Hello,
i have found some Bugs in DVC 3 RC1:
- Effect generator dosen´t work currectly with multi beam LED ( Stairville Stage Tri LED Bundle ).
- Scenes dosen´t save flash modus. ( For Fog Machines )
- I have named some devices in Setup but the Editor Mode and Effect Generator dosen´t show the Name. He shows only the device and the DMX Adress. The faders dosen´t show the names in all modes. The software "Easy Stand Allone" from Nicolaudie shows the individual name on faders.
-In Live Mode individual setting form dimmer and speed dosen´t save. (scene buttons)
I missed Colored Faders... ( See Easy Stand Allone)
Thats all for today...
Greetz Volker
Bug Report on DVC 3 RC 1
Bug Report on DVC 3 RC 1
DVC3 GZM
Hi
Thanks for your bug reports
This will be fixed in the next version
This will be fixed in the next version
The name is shown on the tab at the bottom. I'm not sure what you mean when you say that Easy Stand Alone shows the fixture name on the faders
I don't understand
Daslight offers tabs and a fixture selection window instead
Thanks for your bug reports
- Effect generator dosen´t work currectly with multi beam LED ( Stairville Stage Tri LED Bundle ).
This will be fixed in the next version
- Scenes dosen´t save flash modus. ( For Fog Machines )
This will be fixed in the next version
- I have named some devices in Setup but the Editor Mode and Effect Generator dosen´t show the Name. He shows only the device and the DMX Adress.
The name is shown on the tab at the bottom. I'm not sure what you mean when you say that Easy Stand Alone shows the fixture name on the faders
-In Live Mode individual setting form dimmer and speed dosen´t save. (scene buttons)
I don't understand
I missed Colored Faders... ( See Easy Stand Allone)
Daslight offers tabs and a fixture selection window instead
-In Live Mode individual setting form dimmer and speed dosen´t save. (scene buttons)
I don't understand
I have some scenes with 30% Dimmer Level and when i restart DVC all levels always 100%. DVC dosent´save this settings.
New Bug found:
DVC 3 save programms incorrect. i have some scenes for scanners an moving heads, after save some scenes and groups no longer away.. ( the first programm have 332kb, after save the same programm have only 204 kb)
DVC3 GZM
Bug reurt - confirm and one more
When FX crashes (see my post) DVC3RC1 mostly - not always - loses the related scenes. Fortunately there is a working import function for repairing itDVC 3 save programms incorrect.
.Another Bug (?): When I create an effect in the Live mode it works fine. But: all scenes that are not related to the effect turn completely off. All faders across all fixtures are set to LTP =0. Is this indended this way? From my perspective the Effect button has to address the selected fixtures only.
Nobby99
I have found 2 more issues with DVC3 RC1:
Saving seems to be a problem. Yesterday I programmed a number of scenes which I wanted to recall via Midi. These were a range of individual mixed colors to be called up through the BCF 2000 buttons. Everything worked, but 3 hours later, all scenes of a particular DMX value (one fixture, but 2 dmx groups) had lost the Midi link. The others remained.
Another issue - I do not know if this is intended or a bug or a mistake from my end: For DJing I use Midi to change light effects quickly. I have a number of programmed scenes, which I manage through Midi (Call-up, Speed, Dim) in LIVE Mode. I also have other fixtures which are primary managed through Midi like KLS 1001, CLS-3. Although I see the faders in Live Mode, however, changes are possible only in the editor mode (Midi had been set in the editor mode). And when I switch from Live to Editor Mode, scenes turn off – they have to be activated again (Release is always set to off).
Nobby99
Saving seems to be a problem. Yesterday I programmed a number of scenes which I wanted to recall via Midi. These were a range of individual mixed colors to be called up through the BCF 2000 buttons. Everything worked, but 3 hours later, all scenes of a particular DMX value (one fixture, but 2 dmx groups) had lost the Midi link. The others remained.
Another issue - I do not know if this is intended or a bug or a mistake from my end: For DJing I use Midi to change light effects quickly. I have a number of programmed scenes, which I manage through Midi (Call-up, Speed, Dim) in LIVE Mode. I also have other fixtures which are primary managed through Midi like KLS 1001, CLS-3. Although I see the faders in Live Mode, however, changes are possible only in the editor mode (Midi had been set in the editor mode). And when I switch from Live to Editor Mode, scenes turn off – they have to be activated again (Release is always set to off).
Nobby99
I have some scenes with 30% Dimmer Level and when i restart DVC all levels always 100%. DVC dosent´save this settings.
Ok I see, it will be fixed int he next version
after save some scenes and groups no longer away
I'm not sure exactly what you mean here. We have found a bug this week where an imported scene index is not stored correctly, did you import some scenes?
When FX crashes
I don't understand what you mean. When the FX generator crashes?
all scenes that are not related to the effect turn completely off. All faders across all fixtures are set to LTP =0. Is this indended this way?
This is a bug and will be fixed in the next version
all scenes of a particular DMX value (one fixture, but 2 dmx groups) had lost the Midi link
I can't reproduce this right now, see if you can find a pattern
changes are possible only in the editor mode (Midi had been set in the editor mode).
are you referring to channel fader changes or scene changes?
When I want to integrate an audio file in DVC3 (latest version) with a scene, an error message is the consequence: "MCI-failure... unknown command"
This will be fixed in the next version
Thanks for all your comments
