Hello! I´m using DVC 1 and now i want to "update" to DVC 2. I tried to create a small Project with a few PAR 64 Lights (from "_Generic-folder" of the Scan Library) an some Scanners and Moving Heads.
The Moving-Lights worked well in 3D, but the PAR Lights didn´t. No reaction to any moves of the Channel faders! Why? It´s the same with all PAR-Lights and 1-channel fixtures!
I installed the newest Version of DVC2 on 1 PC with WinXP and a Laptop with Windows 7. The same on every Computer! I tried the Demo-Projects - no reaction of the PAR-Lights!
Whats wrong with me ? Thank you for your answers! And excuse me, my English is very bad
Harri
PAR-Lights don´t work in Virtual 3D Simulator
PAR-Lights don´t work in Virtual 3D Simulator
I have the same problem with the fixtures! "Par 56" and with the "Single channel" also from the _generic library.
Also no simulation of these fixtures in the Virtual 3D simulator.
strange for such a simple fixtures.
My Led Pars 56 and my eurolite TS 7 scanners works good.
Using :
Daslight Virtual Controiller 2
DVC3 512
I'm curious about the solution
Also no simulation of these fixtures in the Virtual 3D simulator.
strange for such a simple fixtures.
My Led Pars 56 and my eurolite TS 7 scanners works good.
Using :
Daslight Virtual Controiller 2
DVC3 512
I'm curious about the solution
Hi.
I've posted the same problem with me, here: http://www.daslight.com/support/viewtopic.php?t=1140
I'm curious too
The "real" lights will work with the controller?
Thank you in advance...
I've posted the same problem with me, here: http://www.daslight.com/support/viewtopic.php?t=1140
I'm curious too
The "real" lights will work with the controller?
Thank you in advance...