Add QTX FX 900 Hazer - Help

sbclighting · Post by **sbclighting** » Mon Jul 25, 2011 7:47 am

Hi I'm a bit of a new-comer to DAS Light - and I was wondering if you would be able to give me a bit of help on how to add in the ability to control a QTX Light FX900 hazer machine.

It is a 1 Channel unit and 0-5% is off and everything above that just increases the intensity of output.

I attempted to make a new fixture for this but it did not seem to work or give me any control of it.

Any help would be greatly appreciated! I'm sure it's something fairly straightforward that I'm missing!

Cheers.

Post by **simonB** » Mon Jul 25, 2011 2:20 pm

You need to add 1 dimmer channel, and add an OFF preset and a dimmer preset. Make sure you have the step/proportional checkbox checked.

Check out the scan library video tutorials here:
http://www.daslight.com/tutorials.php

Scan library manual:
http://www.daslight.com/online_manuals/ ... dfPJk8.htm

Send me your profile and I will take a look at it

sbclighting · Post by **sbclighting** » Tue Jul 26, 2011 2:30 pm

Great - thanks for the help - I'll take a look at doing that and let you know how I get on with it!

How would I go about sending you a copy of the fixture?

Thanks again.

Post by **simonB** » Wed Jul 27, 2011 8:45 am

You can e-mail it me, click the e-mail button below my post