Hi all i'm an old Daslight user, I started over 15 years ago and i never had a problem.
Recently I bought a DVC gold interface for a pub with a simple light rig and programmed it for using in stand alone mode with the top buttons.
Now I have to add 4 external switches for triggering 4 scenes from another part of the room. In the past, i used without problem the fe10 connector with dry contacts, i've done it many times.
Now the the 10 pin connector is not used, i've found a 20 pin connector and i can't find the pinout schematics. Searching in the web i've found something but it doesn't work. I can't also understand where in Daslight 5 i can assign the dry contacts to the scenes. The user manual talks about the port mapping menu, but it only works with the 10 internal buttons and not with the dry contacts.
Where can i find the pinout of the 20 pin connector? What is the right procedure for assign the contact to a scene? Thank you very much
At this link you can see one of my oldest works, using dvc3 and dry contacts of a 512gold interface
https://www.claypaky.it/en/news/an_old_ ... clay_paky/