10 points multi-touch

[Mclerx]

I saw in the Daslight4 forum that according to Raphael_Nicolaudie Daslight5 would be compatible with 10 point touch screens.
I think that is still not the case. The touch screen only reacts like a mouse. I work with a laptop with touchscreen (for setup and control) and with an external Viewsonic TD2230 Touch Monitor (for the "Touch" window).
Both work well with a multitouch test program.
And both also work with the Behringer X-Air mixer app, with all 10 points.
So the limitation is still there with Daslight.
On the "Daslight Remote App" that is strangely enough possible. But then you are connected via wifi, and that is not stable enough when the venue is full of people.
So please Daslight people, can that be developed?
Thank you very much in advance!

[klauslein]

Hallo Mclerx,

abgesehehen von deinem Problem mit dem Touchscreen, empfehle ich für dich - und auch für alle Anwender die auf der Bühne mit WLAN arbeiten, dringend auf eurem Router einen Mac Filter einzurichten.
Dann könnt ihr für alle eure WLan Geräte und LAN Geräte eine eigene ID vergeben, die im Router hinterlegt wird. Damit seid ihr auf der Bühne vor allem geschützt was von Außen stören könnte.
Ihr habt euer privates WLAN Universum geschaffen.
Seit 3 Jahren nutze ich das auf der Bühne und es gibt keine Störungen, oder Abbrüche mehr. Selbst wenn Hunderte von Handys direkt neben dir sind.

Liebe Grüße
Klaus


Hello Mclerx,

apart from your problem with the touchscreen, I strongly recommend that you - and all users who work with WLAN on stage - set up a Mac filter on your router.
Then you can assign a separate ID for all your WLAN devices and LAN devices, which is stored in the router. This will protect you on stage from anything that could interfere from outside.
You have created your own private WLAN universe.
I have been using this on stage for 3 years and there are no more disruptions or cancellations. Even when there are hundreds of mobile phones right next to you.

Best regards
Klaus

[Mclerx]

Hi Marc,
Have you noticed any specific differences in responsiveness between your laptop’s touchscreen and the external ViewSonic TD2230 when using Daslight 5, or do both screens behave similarly with the limitation?
Chill Guy Clicker

They react both the same way

[bekean]

I saw in the Daslight4 forum that according to Raphael_Nicolaudie Daslight5 would be compatible with 10 point touch screens.
I think that is still not the case. The touch screen only reacts like a mouse. I work with a laptop with touchscreen (for setup and control) and with an external Viewsonic TD2230 Touch Monitor (for the "Touch" subway surfers window).
Both work well with a multitouch test program.
And both also work with the Behringer X-Air mixer app, with all 10 points.
So the limitation is still there with Daslight.
On the "Daslight Remote App" that is strangely enough possible. But then you are connected via wifi, and that is not stable enough when the venue is full of people.
So please Daslight people, can that be developed?
Thank you very much in advance!

Has anyone found a workaround to enable true multitouch functionality in Daslight 5 on Windows?

[michaeljordan]

I would like to propose the idea of ​​adding 10-point touch screen support as a key feature.
Check the Daslight 5 update and Experiment with different settings to get an accurate assessment.

[dmf747]

Hello.

Seriously, it doesn't support a touchscreen? Luckily, I checked this post, as the plan is to install Dashlight 5 with a touchscreen in the stores to make things easier for the user. Is there a provision for this?

[klauslein]

Hallo,

Das dürfen sie bitte nicht verwechseln.
Daslight 5 unterstützt eine ganze Menge an touchscreenfähigen Geräten.
Bei mir selbst sind ein Android Tablet, 1 Ipad und mein Samsung Handy im Einsatz.

Mit den 10 Punkt Tochscreen ist ein anderes Gerät gemeint.
Keine Panik. Daslight 5 wird von vielen Tausend Nutzern mit Touchscreens genutzt.

Gruß Klaus


Hello,

Please don't confuse that.
Daslight 5 supports a whole lot of touchscreen-enabled devices.
I use an Android tablet, 1 Ipad and my Samsung phone.

The 10 dots of the tochscreen mean another device.
Don't panic. Thelight 5 is used by many thousands of users with touchscreens.

Greetings from Klaus

[dmf747]

Thanks for the clarification. And yes, I understand it works on tablets or mobile devices, but the idea is to connect a touch screen to the PC. Isn't this possible?

[Mclerx]

Thx to the devs foor adding the "multi touch support for touch screen" in Version 5.0.6!
Great job!
Already tested it en so far it works!