Need Help to Sync Touch Faders with Scene Changes

[luciedonald]

Hello,
I use Daslight 5 to control my dimmer packs, among other things, and for that purpose, I simply use one _Generic/Par 64 on each of the first 24 channels. This works fine so far, but now I want to add 24 faders to the touch interface, to control the individual lamps connected to the dimmer packs separately. However, I also want to be able to use the lamps in scenes. But I can't seem to achieve this.
For example: I start a scene where my dimmer packs are also controlled, but I might notice that one lamp is too bright. So I want to manually dim it down with the fader on the touch interface. However, when I turn off the scene, the fader should return to 0%. But it doesn't. It remains at the manually entered value, and no scene can change this fader unless the priority is set to highest.
So, I want to reflect my first 24 channels with faders on the touch interface, which always show the current position of the fader. For example, when a scene is activated, but also be able to manually adjust it. And when the scene is turned off or another scene is activated, it should adjust accordingly as programmed in the scene.
Is this somehow possible?
Thank you for your help!