Kontaktansteuerung DVC Gold / Daslight 5

512 In, 512 out or 2x512 out. Stand Alone memory (512 out)

Moderators: TomHat, simonB

CTB2024
Posts: 4
Joined: Mon Jan 15, 2024 8:31 pm
Operating System: Windows

Kontaktansteuerung DVC Gold / Daslight 5

Post by CTB2024 »

Hallo
ich habe 5 Szenen programmiert und in das DVC Gold eingespielt.
Ich habe den Szenen Ports zugewiesen.
leider funktioniert die Ansteuerung über die Kontakte nicht. über die Tasten funktioniert das.
Die Funktion (2) wird über die Kontakte ausgeführt. Alle anderen sind nicht in Funktion
was habe ich falsch gemacht ?

Gruß
Ossi
TomHat
Posts: 1413
Joined: Tue Feb 23, 2016 9:11 am
Location: France
Contact:

Re: Kontaktansteuerung DVC Gold / Daslight 5

Post by TomHat »

Hello,

This should be fixed in next version. Thank you for reporting.

Regards,
TomHat
--
Daslight Support

Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
CTB2024
Posts: 4
Joined: Mon Jan 15, 2024 8:31 pm
Operating System: Windows

Re: Kontaktansteuerung DVC Gold / Daslight 5

Post by CTB2024 »

Wann kommt das nächste update?
Welches Update wird benötigt für DVC Gold oder für Daslight ?
CTB2024
Posts: 4
Joined: Mon Jan 15, 2024 8:31 pm
Operating System: Windows

Re: Kontaktansteuerung DVC Gold / Daslight 5

Post by CTB2024 »

?????????
Wie lange wird eine Lösung des Problems noch brauchen. Das Gerät muss in Funktion gebracht werden und das geht nicht.
Gruss Norbert
reba691
Posts: 6
Joined: Sun Feb 25, 2024 2:41 pm
Operating System: Windows

Re: Kontaktansteuerung DVC Gold / Daslight 5

Post by reba691 »

@Norbert:
Wir wollen auch mit der DVC Gold eine Standalone Version, bei der man die Szenen über Signale an den Pins 1-16 starten kann. Das sollte gehen, wenn ich das richtig verstanden habe. Was sollen denn sonst die Pins machen? Welches Setup hast du?
Beste Grüße
Götz
reba691
Posts: 6
Joined: Sun Feb 25, 2024 2:41 pm
Operating System: Windows

Re: Kontaktansteuerung DVC Gold / Daslight 5

Post by reba691 »

TomHat wrote: Tue Jan 16, 2024 2:41 pm Hello,

This should be fixed in next version. Thank you for reporting.

Regards,
Hi TomHat,
what exactly are the pins for? What can be done with them? Can you start scenes via them in standalone mode? When is the mentioned update available?
Thanks!

Best regards
CTB2024
Posts: 4
Joined: Mon Jan 15, 2024 8:31 pm
Operating System: Windows

Re: Kontaktansteuerung DVC Gold / Daslight 5

Post by CTB2024 »

Hallo in die Runde,
ich bin am verzweifeln!!!
Problem:
Ich möchte 4 ( 6 ) Szenen im Stand Alone Modus eines DVC Gold über die Tasten und über die Schaltkontakte steuern.
Es ist eigentlich simple.
Mal funktionieren die Scenen mal nicht

Kann mir da mal jemand helfen

oder Wohnt jemand, der helfen kann, in der Nähe von Bremen
Ich wohne in 26919 Brake

ich nutze jetzt die aktuelle Software 5.04.2
seitdem funktioniert jedenfalls die Zuordnung der Schaltkontakte nur die Funktionen werden nicht ausgeführt
irgendwie hab ich da den Wurm drin
Gruß
Norbert

Kinosteuerung

DMX
1 RED
2 Green LED Stripe
3 Blue
4 XXXXXXXX
5 warm white
6 Dimmer



10 Dimmer
11 Warm White LED Scheinwerfer
12 cold white
13 effekt


Scene
1 Stripe warmwhite up dimmeng 5 sec and holding
2 Stripe warmwhite down dimming 5 sec and holding
3 updimming Warmwhite in 5 Sec and holding
4 downdimming Warmwhite in 5 Sec and holding

5 Stripe rainbow effekt updimmer and holding
6 Stripe rainbow effekt downdimmer and holding
TomHat
Posts: 1413
Joined: Tue Feb 23, 2016 9:11 am
Location: France
Contact:

Re: Kontaktansteuerung DVC Gold / Daslight 5

Post by TomHat »

Hello,
Please contact customer support here :
https://store.daslight.com/en/support

You should hear back from our team within the same day.

Regards,
TomHat
--
Daslight Support

Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
Post Reply