- The 'Mixer -> All -> Blackout' button acts like a 'FLASH' button. I'm not able to get it to stay 'active'/'ON'. Note: this is an imported show from v4. The only way I've gotten the Master Blackout to stay 'active/ON' is to make a touch control and press that. However, see issue 2 below.
- Not sure how solid the 'TOUCH' tab is yet.
I was attempting to set a Master Blackout for 'ALL' lights. However when I set the master dimmer to touch as a button, I'm only ever able to activate the button to trigger the 'Blackout', but hitting the button again doesn't disable the blackout. I have to go to the 'CONTROL->Mixer->All->Blackout' button and press it to release blackout.
5.0b3: Master Blackout Toggle
-
- Posts: 47
- Joined: Sat May 18, 2019 3:46 am
- Operating System: Windows
- Location: North Carolina, USA
- Contact:
5.0b3: Master Blackout Toggle
2 issues related to blackout.
Re: 5.0b3: Master Blackout Toggle
Hello
For the first question, it will be an option available on future release.
For the 2 , it will be fixed.
Thanks for your help
Regards
Julien
For the first question, it will be an option available on future release.
For the 2 , it will be fixed.
Thanks for your help
Regards
Julien