Screen
Nato262 wrote:I know how to create a matrix but when i add an image to a group of fixtures the image is really blurred.
You have to remember each controllable element (RGB) is the equivalent to one pixel.
So if you wanted to play a video that was in standard UK 4:3 format size you need 768 pixels wide and 576 pixel deep that is 442,368 pixels divide that by 3 RGB LED elements and that gives you 147,456 RGB fixtures needed. Phew that is hell of a lot and would take 288 universes of control.
In one universe you would only be able to get a 13*13 square of RGB (3 channel) fixtures. As you can work out 13*13 resolution is very poor.
This is why videos designed to run on LED video walls are usually specially made to take into account the resolution obtained by the led panels so they do not look blurred or pixelated.
Unless you have 1,000s and 1,000s of £/$/€ then it is not really practical to show proper (tv type videos) on them.
There is another post http://www.daslight.com/support/viewtop ... ght=matrix which I show this 13*13 matrix in operation in the visualiser.
Hope that helps,
Andre