Hy Lightjockey's
Is there a way to set the faders in showmode to a default value, when programm starts ?
Is there a way that i can see the current value of the fader?
Greetings
Pixel
fader start default value
-
- Posts: 14
- Joined: Sun Mar 05, 2017 7:34 am
- Operating System: Windows
-
- Posts: 14
- Joined: Sun Mar 05, 2017 7:34 am
- Operating System: Windows
Re: fader start default value
Ok, Point 1 seems to work - but the value is not transferred to the "easy remote" app
-
- Posts: 3
- Joined: Mon Jul 17, 2017 7:39 pm
- Operating System: Windows
Re: fader start default value
Could you explain to me, how you set a default value for a fader in show mode? Don't get it.
Thanks
Thanks
Re: fader start default value
Hey,
I'm afraid there is no default value set for show mode controls. If some default values aren't correct in your software, the problem must come from the fixture's SSL file.
All values displayed in show mode controls should either be Scenes set values, or Live LTP values. Basically, any currently played values.
Hope this help.
Regards,
I'm afraid there is no default value set for show mode controls. If some default values aren't correct in your software, the problem must come from the fixture's SSL file.
All values displayed in show mode controls should either be Scenes set values, or Live LTP values. Basically, any currently played values.
Hope this help.
Regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
-
- Posts: 3
- Joined: Mon Jul 17, 2017 7:39 pm
- Operating System: Windows
Re: fader start default value
Is there any option, to start some Scenes with the programm start?
for example: in my actual software i use a start value for my moving lights.
if i start the programm, they go to a position i programmed (middle position to the front e.g.)
can i realize this with dvc?
or is there an option to start some scenes with the programm starting?
thanks
for example: in my actual software i use a start value for my moving lights.
if i start the programm, they go to a position i programmed (middle position to the front e.g.)
can i realize this with dvc?
or is there an option to start some scenes with the programm starting?
thanks
-
- Posts: 61
- Joined: Sat Jul 02, 2016 12:43 pm
- Operating System: Windows
- Location: Germany
Re: fader start default value
Hi julianb,
I had neatly the same problem - if I switched a scene off the MH´s moved to its "zero position".
If I started the scene again the MH´s moved with open shutter etc. to the programmed position - looks very bad - not professional.
So I programmed a scene called "passiv state" (Ruheposition). I set all MH´s to a starting position pan/tilt (like your zero position).
First scene in my projekt. The scene setting for release: Off.
In live mode this scene is running permanently. In this case you can start additional scenes. With this workaround the MH´s have a short waypoint to the scene starting point.
Hope that helps - let me know
Thomas
I had neatly the same problem - if I switched a scene off the MH´s moved to its "zero position".
If I started the scene again the MH´s moved with open shutter etc. to the programmed position - looks very bad - not professional.
So I programmed a scene called "passiv state" (Ruheposition). I set all MH´s to a starting position pan/tilt (like your zero position).
First scene in my projekt. The scene setting for release: Off.
In live mode this scene is running permanently. In this case you can start additional scenes. With this workaround the MH´s have a short waypoint to the scene starting point.
Hope that helps - let me know
Thomas
- Attachments
-
- live_mode.jpg (96.99 KiB) Viewed 10710 times
-
- Posts: 3
- Joined: Mon Jul 17, 2017 7:39 pm
- Operating System: Windows
Re: fader start default value
Hallo,
deinem Beitrag nach, kann ich deutsch schreiben
Gibts eine Möglichkeit diese Ruhepositions-Szene automatisch zu starten, wenn ich das Programm öffne? Oder muss ich die am Anfang immer Manuell starten?
Danke
deinem Beitrag nach, kann ich deutsch schreiben
Gibts eine Möglichkeit diese Ruhepositions-Szene automatisch zu starten, wenn ich das Programm öffne? Oder muss ich die am Anfang immer Manuell starten?
Danke
-
- Posts: 61
- Joined: Sat Jul 02, 2016 12:43 pm
- Operating System: Windows
- Location: Germany
Re: fader start default value
Hi
ich befürchte Du musst die Szene bei jedem Programmstart aktivieren, da beim Start zunächst kein DMX Signal anliegt.
Es ist halt nur eine Krücke aber innerhalb einer Show funktionierts - sorry.
Thomas
ich befürchte Du musst die Szene bei jedem Programmstart aktivieren, da beim Start zunächst kein DMX Signal anliegt.
Es ist halt nur eine Krücke aber innerhalb einer Show funktionierts - sorry.
Thomas