3D Simulator does not connect to Daslight

the-hubmaster · Post by **the-hubmaster** » Wed Oct 17, 2012 8:02 pm

I am using Daslight VC 2 04 th of October(the programm says 01 Oct 12???)

I create a new project in Daslight and start the 3D Simulator. Than I patch my fixtures in Daslight and klick OK. Normally the 3D Simulator should patch the same fixtures but it does nothing. Also when I move a fader in Daslight the 3D Simulator does not notice this. The 3D Simulator seems not to be connected with the Daslight software.

davy gabriels · Post by **davy gabriels** » Sat Oct 27, 2012 6:59 pm

Same problem here...daslight beta version 23 oct doesn't connect with 3D visualizer

Richard CSL · Post by **Richard CSL** » Sun Oct 28, 2012 10:57 am

I have the same problem, but interestingly if you open the DMX output panel the values are shown on the grid, so there must be a conection at some level.

nijst001 · Post by **nijst001** » Mon Oct 29, 2012 11:25 am

Here also same problem

Post by **simonB** » Wed Oct 31, 2012 11:44 am

Thanks for this report. The problem has been fixed and you can download a fixed version here:
http://www.daslight.com/downloads/simon ... ulator.exe

davy gabriels · Post by **davy gabriels** » Mon Nov 05, 2012 7:03 pm

simonB wrote:Thanks for this report. The problem has been fixed and you can download a fixed version here:
http://www.daslight.com/downloads/simon ... ulator.exe

Install doesn't work here: missing DIIOem.DLL, I tried on several pc's...

the-hubmaster · Post by **the-hubmaster** » Tue Nov 06, 2012 6:14 pm

davy gabriels wrote:
simonB wrote:Thanks for this report. The problem has been fixed and you can download a fixed version here:
http://www.daslight.com/downloads/simon ... ulator.exe

Install doesn't work here: missing DIIOem.DLL, I tried on several pc's...

It is no installation file. It is the 3D simulator .exe. You have to replace the old one with the new one in the installation folder.

johny3329 · Post by **johny3329** » Tue Jan 08, 2013 7:43 am

Es geht um das Weisse Interface DMX512.
DVC1 ist bisher auf einen XP rechner gelaufen.
Der ist jetzt gegen einen Win7 32Bit mit Touch Monitor getasucht worden

Find keine Treiber für das Interface für Win 7 32Bit???

soundedge · Post by **soundedge** » Wed Mar 13, 2013 4:07 pm

Hello,

if I try the link it directs me to the Homepage of Daslight in a new window. But there is no .exe..am I blind or is it hidden? Today I installed the new Software and it doesn`t work either.

simonB wrote:

Thanks for this report. The problem has been fixed and you can download a fixed version here:
http://www.daslight.com/downloads/simon ... ulator.exe

Greetings from Germany

Joachim

Post by **simonB** » Fri Mar 15, 2013 3:43 pm

This is an old link which is no longer available. Download the latest Daslight version to get the latest simulator

joost88 · Post by **joost88** » Wed Jun 18, 2014 9:25 am

simonB wrote:This is an old link which is no longer available. Download the latest Daslight version to get the latest simulator

The new version has troubles seeing interface so i cant control my lights even tough the interface is connected and seen by daslight. i allready did update firmware.

Daslight Forum

3D Simulator does not connect to Daslight

3D Simulator does not connect to Daslight

Where to find Virtual3DSimulator.exe?

Still troubles