Beginner of DVC2

Joyce Lee · Post by **Joyce Lee** » Tue May 19, 2015 5:15 am

Hi,

I am the beginner of using DVC2. Could I have the suggestion of the below query?

I facing the hard disk problem now and I didn't do any backup for my computer. :cry:

In this case, I need to re-install the DVC2 into the other hard disk? If I choose to change the CPU do anything I need to pay attention?

Your assistance is much appreciated.

Benno · Post by **Benno** » Tue May 19, 2015 8:52 am

Hi Joyce,

You will need to download another copy of the Daslight software from our website onto your new hardrive. Which version you can use depends on what generation of DVC2 you have. The links below have all the information you need to identify your device so you can see what software it's compatible with. I have also included the links to the Daslight download page where you can download the latest versions of your compatible software.

In summary:
1st generation DVC2 is compatible with DVC2 software using 32 bit OS.
2nd generation DVC2 is compatible with DVC2 and possible DVC3 using 32 or 64 bit OS.

http://www.daslight.com/en/faqs.htm
http://www.daslight.com/en/upgrade_offers.htm
http://www.daslight.com/en/download.htm

Hope that helps.

Joyce Lee · Post by **Joyce Lee** » Tue May 19, 2015 11:00 am

Hi Benno,

Thank you for you information provide.

Will go the study it.

Joyce Lee · Post by **Joyce Lee** » Thu May 28, 2015 3:56 pm

Hi Benno,

I am using SIUDI-9. Is that available for:-
- Window 8?
- 64-bit OS?
- DVC3 upgrade?

Benno · Post by **Benno** » Fri May 29, 2015 8:39 am

Hi Joyce,

Private message me your serial number and I will check the compatibility for you.

Cheers

Benno · Post by **Benno** » Fri May 29, 2015 11:08 am

Hi Joyce,

I've checked your device you'll be pleased to know yes you can use it with DVC3, on a 64 bit Windows 8 operation system.

Kind regards