I have problems with my Midicon Pro. I try to map the "Blackout"-Button on my Midicon to the Mixers Blackout-All-Function.
You can see my mapping-settings on the pictures.
[attachment=1]Mapping off.png[/attachment]
[attachment=2]Mapping on.png[/attachment]
The Blackout-Button on Daslight is changed from Push-Button to Toggle-Button
[attachment=0]ButtonMode.png[/attachment]
If I press the Blackout-Button on my Midicon, the Light toggles between on and off, but there is no feedback on my Midicon.
In the Midi-Watcher Window you can see, that there is no output-command to the Midicon.
If I press the Blackout-Button on Daslight, the blackoutfunction toggles between on an off on each klick, but I have only a feedback on Midicon, as long as the Mousbutton ist pressed. If I relese the Mousbutton, the feedback on my Midicon goes off. In the Midi-Watcher you can see, that a Velocity-Value of 127 is send by Mouseklick down and a Velocity of 0 by Mouseklick up, and not 127 ib Blackout is active and 0 if blackout is not active.
If I map a scene, anythhing works fine, the button on Midicon is on, if the scene is on.
Is this a bug or do I something wrong?
Regards,
Michael
No Feedback on Midicon Pro for Blackout-Button
-
- Posts: 72
- Joined: Fri Apr 20, 2012 7:42 pm
- Operating System: Mac OS X
- Location: Germany/Darmstadt
- Contact:
No Feedback on Midicon Pro for Blackout-Button
- Attachments
-
- ButtonMode.png (33.32 KiB) Viewed 485 times
-
- Mapping off.png (44.09 KiB) Viewed 485 times
-
- Mapping on.png (44.27 KiB) Viewed 485 times
Re: No Feedback on Midicon Pro for Blackout-Button
Hello.
It will be corrected in the next release.
Thanks for the report.
It will be corrected in the next release.
Thanks for the report.