Fading problme in Timeline

[mheidler]

In Version B5 from 27.01. on Mac:

I have only 2 RGB-spots. Scene "Spot 1" sets spot 1 to red and dimmer to 100%
Scene "Spot 2" sets spot 2 to red and dimmer to 100%

If I place both Scenes on the timeline to track 1 and 2 at the same time, there are some problems if I try to programm a fade in or out.

See Picture 1:
[attachment=0]Picture 1.png[/attachment]
With a fade in on track 1, spot 1 fades in.
With a fade in on track on and 2, both spots fades in, but both uses the fade in time from spot 1.
With a fade in on track 2, no spot fades in, both switches on.

See Picture 2:
[attachment=1]Picture 2.png[/attachment]
Same Problem, if I use the dimming-curve instead of the fading-function, but vice versa.
With a fade in on track 2, spot 2 fades in.
With a fade in on track on and 2, both spots fades in, but both uses the fade in time from spot 1.
With a fade in on track 1, no spot fades in, both switches on.

[mheidler]

One more test:

Picture "Test 1.png":
Spot 1 has a short fade time, Spot 2 has a log fade time. Works fine.
[attachment=1]Test 1.png[/attachment]

Picture "Test 2.png":
Spot 1 and 2 uses the short fadetime from spot 2. The fade time from spot 1 will be ignored.
[attachment=0]Test 2.png[/attachment]

[juls]

Hello,

Thanks for the report, it will be corrected

[mheidler]

Tested again in Beta7: It works now!
Thank you.

Regards,
Michael