beringher bcf 20000 set up

frenkywhite · Post by **frenkywhite** » Sat Aug 20, 2011 8:26 am

hello gusy with the beringher bcf 2000 what i must do for set up with the daslight? i need an external midi interface? and what i must do for assign buttons.? function with the midi controller?? thanks::

Post by **simonB** » Mon Aug 22, 2011 9:29 am

You can connect the BCF by USB or through a MIDI interface from the MIDI out connector of the BCF.

Information on setting MIDI with Daslight can be found here:
http://www.daslight.com/online_manuals/ ... dfPJk8.htm

Let me know if you have any questions on this

frenkywhite · Post by **frenkywhite** » Mon Aug 22, 2011 11:40 am

simonB wrote:You can connect the BCF by USB or through a MIDI interface from the MIDI out connector of the BCF.

Information on setting MIDI with Daslight can be found here:
http://www.daslight.com/online_manuals/ ... dfPJk8.htm

Let me know if you have any questions on this

ok i understood than i must connect an external midi interface to control midi on daslight but with the berhinger i can control midi with only usb port from beriggher ?? controlling all controls on daslight while effetcs scenes and channels of fixtures

Post by **simonB** » Mon Sep 05, 2011 8:01 am

You can control Daslight from the BCF without a MIDI interface, directly from the USB output on the BCF.

You cannot control all controls on Daslight via MIDI, but you can trigger scenes/effects and some other functions (see the manual for a full list)