Hallo ich habe 40 Stück 60W Moving Beams und möchte den Strobe über Midi APC Mini ausführen. Leider funktioniert das nicht bei alle 40 Geräten sondern nur bei 5 Stück.
Das gleiche habe ich schon für andere Moving Head programmiert das hat gut funktioniert.
Ist in der Software eine Begrenzung drin
Bildreihe
DVC4 Gold ZM
2x APC Mini
Grüße
Fader Midi Zuweisung APC Mini
Fader Midi Zuweisung APC Mini
- Attachments
-
- shutter1-2.jpg (231.64 KiB) Viewed 3636 times
-
- shutter3-4.jpg (239.37 KiB) Viewed 3636 times
-
- shutter5-6.jpg (233.06 KiB) Viewed 3636 times
Re: Fader Midi Zuweisung APC Mini
Hab hier nochmal ein Foto und bitte um Klärung roter Kreis dort Steht der Wert 1000 drin was besagt er.
20 Geräte a 14 Kanäle Universum 1
25 Geräte a 6 Kanäle Universum 1
32 Geräte a 9 Kanäle Universum 2
16 Geräte a 13 Knäle Universum 2
24 Geräte a 13 Kanäle Universum 3
4 Geräte a 5 Kanäle Universum 3
1 Gerät a 3 Kanäle Universum 3
Grüße
20 Geräte a 14 Kanäle Universum 1
25 Geräte a 6 Kanäle Universum 1
32 Geräte a 9 Kanäle Universum 2
16 Geräte a 13 Knäle Universum 2
24 Geräte a 13 Kanäle Universum 3
4 Geräte a 5 Kanäle Universum 3
1 Gerät a 3 Kanäle Universum 3
Grüße
- Attachments
-
- midi.jpg (129.47 KiB) Viewed 3623 times
Re: Fader Midi Zuweisung APC Mini
desweiteren habe ich gesehen das die Midiwerte immer verschwinden
- Attachments
-
- midi.jpg (131.72 KiB) Viewed 3612 times
-
- midi2.jpg (128.13 KiB) Viewed 3612 times
Re: Fader Midi Zuweisung APC Mini
Hello,
The only notable limitation is that D4 is only capable of handling MIDI on one universe. I understand this could be an issue for your show as you're using up to 3 universes. Also, since APC MINI is using a fixed channel that can't be changed, your two APC MIDI will work exactly the same as far as D4 is concerned. Our software responds to MIDI signals regardless the identity of the sender, and will send feedback accordingly.
To answer your question, the "1000" is the index of your DMX channel. I'm assuming you're trying to control a DMX channel at: address 488 - universe 2. That's 512 + 488 = 1000.
Using the EasyRemote tool instead might solve that for you as you could then control all of your machines from a custom-made control table.
Best regards,
The only notable limitation is that D4 is only capable of handling MIDI on one universe. I understand this could be an issue for your show as you're using up to 3 universes. Also, since APC MINI is using a fixed channel that can't be changed, your two APC MIDI will work exactly the same as far as D4 is concerned. Our software responds to MIDI signals regardless the identity of the sender, and will send feedback accordingly.
To answer your question, the "1000" is the index of your DMX channel. I'm assuming you're trying to control a DMX channel at: address 488 - universe 2. That's 512 + 488 = 1000.
Using the EasyRemote tool instead might solve that for you as you could then control all of your machines from a custom-made control table.
Best regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500