Hi Daslight forum,
I Have created two groups that contains:
Group1- "Scene1" and "Trigger Scene"
Group2 - "Scene2"
Both Scene1 and Scene2 has many Steps and Scene1 also has an Mp3 file added. "Trigger scene" is only used to trigger Scene1 and Scene2 simultaneously - it has a single step of 40 milli seconds and is set to jump custom scenes 1 and 2.
Problem. Only one of the scenes get triggered when I in the "Live" tab press the "Trigger scene"
Any idea what todo??
Thanks in advance
Trigger two scenes simultaneously
-
- Posts: 477
- Joined: Tue Nov 17, 2015 6:48 pm
- Operating System: Windows
- Location: Belgium
- Contact:
Re: Trigger two scenes simultaneously
Hi,
Unselect "Always loop" for the trigger scene and set the jumps to both scenes Scene1 and Scene2.
Set a very short Hold time to the trigger scene if no delay is needed.
Both scenes should start together.
The release mode for Scene1 and Scene2 must be "Off" or "Group". It will not work with the other options (because one of the scenes will exclude the other).
If you wish, post your show file here and I will have a look.
Hope this helps.
Unselect "Always loop" for the trigger scene and set the jumps to both scenes Scene1 and Scene2.
Set a very short Hold time to the trigger scene if no delay is needed.
Both scenes should start together.
The release mode for Scene1 and Scene2 must be "Off" or "Group". It will not work with the other options (because one of the scenes will exclude the other).
If you wish, post your show file here and I will have a look.
Hope this helps.
Pol Davril
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be