Hallo,
I've bought no-name Light Par Led 36, 72w from eBay. it is connected to my PC through cameo DVC4 and Daslight. For that I've used 7 channel SSL2 file from library (par36 led.3), it seem to be right file. Also there's manual for DMX for this can (picture attached). Seem to be easy. But it doesn't work properly. It is not glow constantly, its blinks very shortly, once per 30-40 sec. Even if Daslight shows that it should glows (no strobe active). Though I can change colors with Daslight correctly - it means that it is connected properly. It is very weird. I would appreciate any help, thank you!
Daslight and Light Par Led 36 problem - doesn't glow
Daslight and Light Par Led 36 problem - doesn't glow
- Attachments
-
- photo_2018-09-23_20-51-43.jpg (113.4 KiB) Viewed 3789 times
-
- photo_2018-09-23_20-51-39.jpg (191.82 KiB) Viewed 3789 times
Re: Daslight and Light Par Led 36 problem - doesn't glow
Try to adjust the DMX output settings in Daslight (HardwareManager). Sorry to say but these Ebay LED fixtures are sometimes cheap en poorly designed and not always receive DMX signals correctly.
Re: Daslight and Light Par Led 36 problem - doesn't glow
orginq wrote:Try to adjust the DMX output settings in Daslight (HardwareManager).
thanks, but doesn't work
orginq wrote:Sorry to say but these Ebay LED fixtures are sometimes cheap en poorly designed and not always receive DMX signals correctly.
yepp, that might be it