Hi,
I´ve some problems when I close the Daslight4 Software.
Setup: 4 Moving Heads, 5 Pars, 2 Flood Panels
If I close the software, the moving heads are still moving, 2 of the 5 LED pars are still on and make a rainbow color change, 1 of the 2 flood panels is still on in white mode.
The problem also exists if I disconnect the usb cable.
Therefore my intention was that the usb device is playing in standalone mode.
I´ve completely reseted the USB device in the hardware manager.
The problem still exists
Someone who have the same problem and give me some hints?
Thanks,
kraimor
Close Daslight - still moves or lights are on
Re: Close Daslight - still moves or lights are on
Hi kraimor,
Try writing a empty show to the Stand Alone memory. This can be done in the Hardware Manager.
Try writing a empty show to the Stand Alone memory. This can be done in the Hardware Manager.
Benno
--
Product Support
--
Product Support
-
- Posts: 14
- Joined: Sun Jul 09, 2017 5:28 pm
- Operating System: Windows
- Location: Zurich
Re: Close Daslight - still moves or lights are on
Hi kraimor,
first I would check how your light devices are configured. Most of the devices nowadays do have the ability to define how they should act when the DMX signal is lost. Typical is that you can choose between blackout, last dmx status and autoshow.
Regards, Torsten
first I would check how your light devices are configured. Most of the devices nowadays do have the ability to define how they should act when the DMX signal is lost. Typical is that you can choose between blackout, last dmx status and autoshow.
Regards, Torsten
Cameo DVC 4 Version May 03 2017 / Windows 10
Re: Close Daslight - still moves or lights are on
Hi,
Do you have the Terminator at the end? If not, the lights by default search for signal...
Do you have the Terminator at the end? If not, the lights by default search for signal...
Re: Close Daslight - still moves or lights are on
Terminator is installed.
The problem was a saved show on the hardware.
Thanks Benno
The problem was a saved show on the hardware.
Thanks Benno
Daslight 4