I use 8 groups of headlights with dvc4. 7 groups are
for Stage-Lightning. One group is for Uplightning. I want
to dimm the Stage-Lights all together but not the Uplights.
(We use actually a Volume-Pedal of a Behringer Floorboard per
Midi to control the Master Dimmer).
My Question:
1. Is there a more simple way to dimm the Stage-Lights without
dimming the Uplights as loading all of the scenes step by step in
the Fader-Bottom of the Scene-Dimmer? (we have more than 50).
2. The Scene-Dimmer Fader-Button in "Show-Mode" does not work.
When I try to push the fader it jumps back and no lights go on.
Other Problem(s):
When I use EasyRemote and load the preset on the ipad, some buttons
are not loaded. If I refresh EasyRemote or close it and start new
its the same (sometimes with other buttons). I have tried it with wlan
between mac and an access point and with cable connection. Although
I tried it with different access points. (Airport Express, Newsonic Stage
Router and Asus RT66)
Moreover when a scene is running and shown as active on EasyRemote
and I switch to another scene, both scenes are shown as active in
EasyRemote although only one scene is active on mac.
- Bildschirmfoto 2017-07-23 um 13.25.07 Kopie.jpg (82.65 KiB) Viewed 7001 times
- Bildschirmfoto 2017-07-23 um 13.23.56 Kopie.jpg (72.88 KiB) Viewed 7001 times
- Bildschirmfoto 2017-07-23 um 13.23.08.png (104.25 KiB) Viewed 7001 times
Sorry, I've tried to load more pictures, but 3 is maximum. Why??