Hallo liebes Daslight-Team,
ich würde gerne einen Schritt innerhalb einer Szene mit einem Midi-Signal weiterschalten.
Im konkreten Fall geht es um ein Kick-Drum Signal eines E-Drums. Bei jedem Kick-Drum-Schlag
sollte zum nächsten Schritt innerhalb einer Szene gewechselt werden.
Haben Sie einen Tipp wie ich das mit Daslight4 umsetzen kann?
Liebe Grüße
Schritt auf Midi-Impuls
Re: Schritt auf Midi-Impuls
Hey,
Best I could advise is to look at the BPM triggering on scenes. You can use MIDI-Clock based BPM to play a scene step by step by performing a right-click on a scene in LIVE mode and selecting the "Step on BPM" option.
Then you need to configure the BPM feature from LIVE pannel (to the right) so it
Think of making sure your MIDI device is checked as MIDI clock input in the preference window:
I know this is not exactly what you had in mind, but I think it might be a good starting point anyways.
Regards,
Best I could advise is to look at the BPM triggering on scenes. You can use MIDI-Clock based BPM to play a scene step by step by performing a right-click on a scene in LIVE mode and selecting the "Step on BPM" option.
Then you need to configure the BPM feature from LIVE pannel (to the right) so it
Think of making sure your MIDI device is checked as MIDI clock input in the preference window:
I know this is not exactly what you had in mind, but I think it might be a good starting point anyways.
Regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500