Help me to connect
-
- Posts: 1
- Joined: Fri Sep 30, 2016 10:00 am
- Operating System: Windows
- Location: Russia, Saint Petersburg
Help me to connect
Hi there! I'm newbie in daslight and i have a question. On our stage we have ETC Congo + etc DMX/RDM Four-Port Gateway. In Dl4 i created virtual device with IP and Mask for our ArtNet, but then nothing to do. What i can to do, that it's work?
Re: Help me to connect
Hi viKdc, to use Daslight 4 with ArtNet you need a DVC3/4 GZM controller along with a ArtNet node.
Benno
--
Product Support
--
Product Support
Re: Help me to connect
can the daslight gzm connect into the artnet node, so all the channels are coming out of the node into the fixtures ?
or is it a seperate connection ? 3 universes out of the gzm and 3 universes out of the node
( im asking because i have a 8 universe node, and i would like to run all 6 universes from the node into the lights )
thanks
or is it a seperate connection ? 3 universes out of the gzm and 3 universes out of the node
( im asking because i have a 8 universe node, and i would like to run all 6 universes from the node into the lights )
thanks
Re: Help me to connect
Hi matthieu, it's not possible to have all 6 universes coming out of the ArtNet Node. As you say it's 3 universes out of the GZM and then 3 universes out of the ArtNet node. Kind regards
Benno
--
Product Support
--
Product Support