Eurolite 1750 Hybrid Derby Washlights do not react on Masterdimmer

[CyberDirk]

Dear DasLight-Team,

I installed latest DasLight4 Version Oct. 22. But Eurolite 1750 Hybrid Derby Washlights do not react on Masterdimmer commands. Washlights are always on 100% light. I want to reduce the light intensity with Masterdimmer function which is not working.

Is there an update patch for EuroLight Hybrid derby FE-1750 to have the wahslights reacting on Masterdimmer?


Best regards Dirk

[TomHat]

Hello,

Can you look into the channels settings of your fixtures and make sure the dimmer channel is marked as "dimmer" in the channels table ?

You need to see a check mark on the "Dimmer" column for your Dimmer channel.

Sometimes this setting isn't set properly on some fixture profiles.

Regards,

[CyberDirk]

Dear TomHat,

thank you so much for your support helping me to find a solution.

I checked the fixture channels for Eurolite led FE-1750 Mode 2.

13 Channels:

1: RED
2: GREEN
3: BLUE
4: UV
5: WASHLIGHT
6: WASHLIGHT STROBE
7: DERBY
8: DERBY STROBE
9: DERBY ROTATION
10: LASER
11: LASER ROTATION
12. STROBE RING
13: AUTO/SOUND CONTROL MODE

Unfortunately I cannot see within these 13 channels a Dimmer channel for Eurolite led FE-1750 Mode 2. I also opened the Fixture in ScanLibary and could not see that Dimmer is one of 13 channels.

I checked my other devices: They have in DasLight4 Vers. 26-Oct-2022 a Dimmer channel and they react perfectly on DasLight Masterdimmer.


Is it possible to add a Dimmer channel for Eurolite led FE-1750? Or could I change e.g. channel 13: AUTO/SOUND CONTROL MODE to 13: DIMMER? Because I do not need the Auto/Sound Function.

Best regards Dirk

[TomHat]

Hello,

I have just tested this fixture profile (mode 2) with Master dimmer in the latest Daslight4 and it seems to be working just fine.
I tested :
- Create a simple scene with full brightness for the washlights (RED GREEN BLUE UV = 255)
- Started the scene in LIVE
- Set the Master Dimmer value to 50 %

The DMX values for the RED, GREEN, BLUE and UV channels are down to 127 as they should be.

Or did I misunderstand your issue ?

Regards,

[CyberDirk]

Ticket solved:

I did the same way like you did and it is working now

I am so happy to have a solution to create now more easily low light moods.

Maybe it was the problem that I programmed the scenes in older versions of Daslight 4. With actual version and actual fixture update going through your steps it works perfectly.

Thank you so much TomHat and have a great day ahead