Martin Wizard not showing in 3D visualizer

The new Daslight - for PC and Mac

Moderators: TomHat, Benno, simonB

Arne
Posts: 3
Joined: Mon Feb 11, 2019 7:26 pm
Operating System: Windows

Martin Wizard not showing in 3D visualizer

Postby Arne » Mon Feb 11, 2019 7:34 pm

Hi,

My name is Arne, 56 yo, live in Germany and I'm playing around a little with the latest version Daslight.
This is all new to me so please be kind when my question might be a bit stupid... :D

Step by step I'm following the online tutorials and I noticed when I patch a Martin Wizard, this fixture does not show up in the 3D visualizer...
Other fixtures do show up but this one doesn't.

It's the simple old 8 Ch Wizard.
I also downloaded the latest ssl2 file for the Wizard, no luck.

I haven't got a Daslight USB interface connected though...
Could that be the reason?

Hopefully someone can shine a Daslight on this... :wink:
Thanks!

Kind regards,

Arne.

TomHat
Posts: 699
Joined: Tue Feb 23, 2016 9:11 am
Location: France
Contact:

Re: Martin Wizard not showing in 3D visualizer

Postby TomHat » Thu Feb 14, 2019 8:16 am

Hello,

Could you please checkout this version of the SSL file and let me know if this one works for you ?
I'd recommend testing it with a new show to be sure.

WIZARD 8CH.zip
(22.41 KiB) Downloaded 39 times


Hope this helps.

Regards,
TomHat
--
Daslight Support

Mail : france@daslight.com
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500

Arne
Posts: 3
Joined: Mon Feb 11, 2019 7:26 pm
Operating System: Windows

Re: Martin Wizard not showing in 3D visualizer

Postby Arne » Wed Feb 20, 2019 4:35 pm

Hi TomHat,

Thank you so much for your kind answer.

I have tested your SSL2 Wizard file and this one shows up in the 3D visualizer... :D
But, to me it looks like it's not possible yet to simulate the Wizard in the visualizer like I think it should.

I'm not an expert but it looks like the reflector and roller (mirror drum), swivel and rotation doesn't work in the 3D visualizer like they should. So 2, 5 and 6.
I cannot say whether 7 and 8 (speed) work because the roller doesn't work in simulation.

I also tried the Martin Acrobat, which is the smaller brother of the Wizard.
Using the Acrobat, the roller doesn't seem to work in the visualizer either...

TomHat, the SSL2 file works correctly on the Wizard in a life situation... :D :D
So life I can controll the Wizard like it should, doesn't work correctly in the 3D visualizer though.

Thanks again TomHat, I hope we can get this working... :wink:

Kind regards,

Arne.

TomHat
Posts: 699
Joined: Tue Feb 23, 2016 9:11 am
Location: France
Contact:

Re: Martin Wizard not showing in 3D visualizer

Postby TomHat » Fri Feb 22, 2019 12:51 pm

Hello,

Would you happen to have the technical sheet (or manual, or whatever document showing the technical specifications of the device) ? If you do, could you send it here (in a .zip file) so we can have a quick look ?

Regards,
TomHat
--
Daslight Support

Mail : france@daslight.com
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500

Arne
Posts: 3
Joined: Mon Feb 11, 2019 7:26 pm
Operating System: Windows

Re: Martin Wizard not showing in 3D visualizer

Postby Arne » Sun Feb 24, 2019 12:01 pm

Hi TomHat... ;-)

Yes, I do have the manual of the Wizard.
It's the "normal" Wizard, not the Extreme version.

I took out the technical pages and included them into the zip file.
TomHat, if you need more information, please tell me, okay ?

Thanks again !

Martin Wizard Tech.zip
(148.86 KiB) Downloaded 28 times


Kind regards,

Arne.

TomHat
Posts: 699
Joined: Tue Feb 23, 2016 9:11 am
Location: France
Contact:

Re: Martin Wizard not showing in 3D visualizer

Postby TomHat » Mon Feb 25, 2019 8:13 am

Hello,

Alright, thanks for sending over the documentation. Now I know where your issue comes from. EasyView cannot handle mirror drum swivel/rotation yet. It has simply not been implemented at this point. Sorry about that ! I'll pass this on to the developpers in charge of EasyView.

Sorry for the inconvenience. Have a good day !

Regards,
TomHat
--
Daslight Support

Mail : france@daslight.com
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500


Return to “Daslight 4”

Who is online

Users browsing this forum: No registered users and 3 guests