windows 8 error
windows 8 error
after installing dvc3 on new windows 8 install I get the following error message upon starting dvc3: Unable to start hi speed usb precision timer ( error 69), {drivers look to be installed correctly in add remove control panel} click on message box, box goes away then dvc3 opens but then interface is not dectected Ideas?
additional win 8 info
I forgot to add that win 8 is 32 bit and dvc3 is the current release Jan/13
-
- Posts: 463
- Joined: Fri Jul 11, 2008 10:30 am
- Location: Orlando. Florida
- Contact:
-
- Posts: 463
- Joined: Fri Jul 11, 2008 10:30 am
- Location: Orlando. Florida
- Contact:
try un installing the drivers, then re installing with the software not open.
you may have to look for the drivers seperately because windows 8 will not load tham from the device like XP would.
I think the drivers can be found on the download page of Daslight.com.
you may have to look for the drivers seperately because windows 8 will not load tham from the device like XP would.
I think the drivers can be found on the download page of Daslight.com.
Music sets the mood Lighting sets the ambience
I followed the instructions below and was not able get software to work in either jan 23 or beta3 versions, after install, launch program (either version) now software crashes, looking at software install info in control panel I find the item called "windows driver package - lightingSoft AG (winUSB) USB (11/21/2012 2.0)"
Both installs were done as first time install
1. Windows Key + R
2. Enter shutdown.exe /r /o /f /t 00
3. Click the "OK" button
4. System will restart to a "Choose an option" screen
5. Select "Troubleshoot" from "Choose an option" screen
6. Select "Advanced options" from "Troubleshoot" screen
7. Select "Windows Startup Settings" from "Advanced options" screen
8. Click "Restart" button
9. System will restart to "Advanced Boot Options" screen
10. Select "Disable Driver Signature Enforcement"
11. Once the system starts, install the driver
Also, make sure you're using the latest beta of the software.
Both installs were done as first time install
1. Windows Key + R
2. Enter shutdown.exe /r /o /f /t 00
3. Click the "OK" button
4. System will restart to a "Choose an option" screen
5. Select "Troubleshoot" from "Choose an option" screen
6. Select "Advanced options" from "Troubleshoot" screen
7. Select "Windows Startup Settings" from "Advanced options" screen
8. Click "Restart" button
9. System will restart to "Advanced Boot Options" screen
10. Select "Disable Driver Signature Enforcement"
11. Once the system starts, install the driver
Also, make sure you're using the latest beta of the software.
Windows 8 error
Tried running as administrator, no difference
windows 8 error
Just tried an experipemt, I copied working folder from win 7 os machine and
pasted it on the root C:/ win8 machine and as far as getting the software to run it seems to be working, I will try to test it with interface asap. I will let you know what happens.
pasted it on the root C:/ win8 machine and as far as getting the software to run it seems to be working, I will try to test it with interface asap. I will let you know what happens.